End Cap - Air Wave - LH (Remove and Replace)
Correction code 14055102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the LH instrument panel end cap. See End Cap - Instrument Panel - LH (Remove and Replace).
-
Release the clips that
attach the LH air wave end cap to the main instrument panel decor trim, and
then remove the cap from the vehicle.
Install
Installation procedure is the reverse of removal.