2020-02-05

Shoulder Switch – Seat Back – 2nd Row – LH (Remove and Replace)

Correction code 13058102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Use a trim tool to release the clips that attach the shoulder switch to the seat.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Insert the trim tool from the front of the shoulder switch.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    The shoulder switch has an electrical connector; do not pull the shoulder switch away from the seat yet.
  2. Disconnect the electrical connector from the shoulder switch.
  3. Remove the shoulder switch from the vehicle.

Install

  1. Connect the electrical connector to the shoulder switch.
  2. Install the shoulder switch and make sure that the clips are fully engaged.
  3. Test the shoulder switch to make sure that it works as expected.