Trunk Load Floor - Front (Remove and Replace)
Correction code
15305002
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Open the rear liftgate.
-
Remove the rear trunk load
floor. See Trunk Load Floor - Rear (Remove and Replace).
TIpUse the pull tab located at the rear edge of the rear trunk load floor to lift it.
- Lift up the front trunk load floor and remove it from the vehicle.
Install
Installation procedure is the reverse of removal.