Housing - Filter - HEPA (Remove and Replace)
Correction code
18105522
0.24
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the HEPA filter assembly. See Assembly - Filter - HEPA (Remove and Replace).
- Remove the HEPA filter cover. See Cover - Filter - HEPA (Remove and Replace).
- Remove the carbon and HEPA filters from the HEPA filter housing. See Filters – Carbon and HEPA (Remove and Replace).
Install
Installation procedure is the reverse of removal.