24/02/2023 13:56:01

Carpet - 2nd Row (7-Seat) (Remove and Replace)

Correction code 15303212 1.02 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all the doors and lower all the windows.
  2. Remove the LH and RH front seats from the vehicle. See Seat Assembly - 1st Row - LH (Remove and Replace).
  3. Remove the center console from the vehicle. See Center Console (Remove and Install).
  4. Release the clips (x4) that attach the LH upper B-pillar trim assembly to the B-pillar, and then move the trim aside.
    Tip: Pull the bottom of the upper B-pillar trim toward the inside of the vehicle, and then pull the top to release the remaining clips.
  5. Remove the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (7 Seat) (Remove and Replace).
  6. Remove the LH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Non-Structural Pack) (Remove and Replace).
  7. Repeat step 4 through step 6 for the RH side of the vehicle.
  8. Move the 2nd row seats fully rearward.
  9. Remove the 2nd row floormat.
  10. Remove the RH 2nd row seat seat track cover. See Cover - Seat Track - 2nd Row Seat - RH (7-Seat) (Remove and Replace).
  11. Remove the center 2nd row seat seat track cover. See Cover - Seat Track - 2nd Row Seat - Center (7-Seat) (Remove and Replace).
  12. Remove the LH 2nd row seat seat track cover. Cover - Seat Track - 2nd Row Seat - LH (7-Seat) (Remove and Replace).
  13. Pull the 2nd row carpet towards the front of the vehicle to release it from the RH 2nd row seat.
  14. Pull the 2nd row carpet towards the front of the vehicle to release it from the LH 2nd row seat.
  15. Pull up at the rear of the 2nd row carpet, slide the carpet rearward to release it, and then remove the carpet from the vehicle.

Install

  1. Position the 2nd row carpet to the floorboard, and then slide the carpet forward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure the carpet tucks beneath the front main carpet and air duct.
  2. Install the 2nd row carpet into the RH 2nd row seat.
  3. Install the 2nd row carpet into the LH 2nd row seat, and then secure the Velcro strap.
  4. Remove the LH 2nd row seat seat track cover. Cover - Seat Track - 2nd Row Seat - LH (7-Seat) (Remove and Replace).
  5. Remove the center 2nd row seat seat track cover. See Cover - Seat Track - 2nd Row Seat - Center (7-Seat) (Remove and Replace).
  6. Remove the RH 2nd row seat seat track cover. See Cover - Seat Track - 2nd Row Seat - RH (7-Seat) (Remove and Replace).
  7. Install the rear floormat.
  8. Install the LH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Non-Structural Pack) (Remove and Replace).
  9. Install the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (7 Seat) (Remove and Replace).
  10. Insert the top of the LH upper B-pillar trim under the headliner to align the clips, and then press the bottom to fully seat the lower portion of the trim.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the seal correctly overlaps the trim.
  11. Repeat step 8 through step 10 for the RH side of the vehicle.
  12. Install the center console into the vehicle but do not install the rear underhood apron yet . See Center Console (Remove and Install).
  13. Install the LH and RH front seats into the vehicle. See Seat Assembly - 1st Row - LH (Remove and Replace).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Do not reconnect 12V/LV power until both seats are installed.
  14. Raise all the windows and close all the doors.