19/02/2021 13:49:19

B-Cover - Outer - 3rd Row - Center (Remove and Replace)

Correction code 13090092 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all the doors and fully lower all the windows.
  2. Move the front seats fully forward.
  3. Move the 2nd row seats into easy entry mode.
  4. Remove the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Remove and Replace).
  5. Release the upper portion of the center 3rd row outer B-pillar from the inner B-cover, and then release the clips that attach the outer cover to the inner cover.

Install

  1. Position center 3rd row outer B-cover onto the inner B-cover, install the clips, and then secure the top portion of the outer B-cover to the inner B-cover.
  2. Install the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Remove and Replace).
  3. Move the 2nd row seats and front seat into the original positions.
  4. Raise all the windows and close all the doors.
  5. Close the liftgate.