2026-01-07

Apply WD-40 to Door Handle Pivot Pins (Maintenance)

Correction code 1145010005 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

  • 2026-01-07: Released new procedure.
In severe winter conditions, applying WD-40 to door handle pivot pins can help prevent ice buildup that might immobilize the handle. Consider applying WD-40 to the door handle pivot pins if you are expecting freezing rain, heavy snow, or icy conditions. Reapply as needed.
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Read and observe the instructions and warnings provided by WD-40 prior to performing this procedure.

Procedure

  1. Open the door handle and prop it open using a folded towel or other soft material.
  2. Attach the provided straw to the nozzle of the WD-40 bottle.
  3. Put on eye protection.
  4. Place the end of the straw next to the pivot pin and spray it for approximately one second, taking care not to accidentally spray other components.
    Informational PurposesAn informational icon, calling your attention
    Note
    Rest the end of the straw on the top of the spring around the pivot pin to better aim the spray.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Make sure eye protection is worn when performing this step.
  5. Remove the towel or other soft material used to prop the door handle open.
  6. Pivot the door handle in and out approximately ten times.
  7. For a second time, place the end of the straw next to the pivot pin and spray it for approximately one second, taking care not to accidentally spray other components.
    Informational PurposesAn informational icon, calling your attention
    Note
    Rest the end of the straw on the top of the spring around the pivot pin to better aim the spray.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Make sure eye protection is worn when performing this step.
  8. Remove material used to prop the door handle open.
  9. Pivot the door handle in and out approximately ten times.
  10. Perform this procedure on the other three door handles.