Consumable Parts
Bolts
All patch bolts need to be replaced due to wear and tear during disassembly, except for those on aero shield panels, which can be reused after applying adhesive.
Safety-sensitive bolts must be replaced (e.g., seatbelt bolts or seat fixing bolts).
| Part Number | Description | Quantity |
|---|---|---|
| 1036655-00-A | Bolt that attaches the steering wheel to the steering column | 1 |
| 1088969-00-B | Bolt that attaches the caliper to the knuckle | 2 |
| 1100020-00-A | Bolt that attaches the rear drive unit oil pump to the rear drive unit | 2 |
| 1100020-00-A | Inverter fixing bolt | 12 |
| 1104475-00-F | Fixing bolt in high-voltage ancillary bay | 14 |
| 1105061-00-E | Bolt that attaches the touchscreen to the instrumental panel carrier | 2 |
| 1109912-00-A | Bolt that attaches the front lower lateral link to the subframe | 2 |
| 1110188-00-B | Bolt that attaches the LH front motor mount isolator to the body | 3 |
| 1111154-00-B | Bolt that attaches the rear stabilizer bar to the rear subframe | 4 |
| 1111522-00-A | Bolt that attaches the upper aft link to the left rear suspension knuckle | 1 |
| 1111864-00-B | Bolt that attaches the front drive unit mount to the drive unit | 3 |
| 1112138-00-C | Bolt that attaches the passenger airbag to the cross car beam | 4 |
| 1116594-00-B | Bolt that attaches the front knee airbag to the instrument panel | 4 |
| 1117248-00-A | Front seat pretensioner bolt | 1 |
| 1117250-00-A | Front seat belt buckle fixing bolt | 1 |
| 1117252-00-A | Bolt that attaches the LH buckle to the body of the vehicle | 1 |
| 1117669-00-A | Bolt that attaches the HV probe cover to the ancillary bay cover | 2 |
| 1128435-00-C | Bolt that attaches the seat seatback frame to the seat cushion frame | 4 |
| 1456640-00-A | Stud bolt that attaches the front subframe to the body | 2 |
| 1458818-00-B | Bolt that attaches the front seat to the body | 4 |
| 1461643-00-A | Bolt that attaches the front subframe to the body | 2 |
| 1461652-00-A | Bolt that attaches the front subframe to the body | 2 |
| 1461654-00-A | Bolt that attaches the front drive unit to the body | 2 |
| 1461657-00-A | Bolt that attaches the rear subframe to the vehicle | 4 |
| 1508638-00-D | Front door glass fixing bolt | 1 |
| 1508638-00-D | Rear door glass fixing bolt | 2 |
| 1919198-00-A | Bolt that attaches the forward-facing camera to the windshield bracket | 1 |
| 1011416-00-B | Forward-facing camera fixing bolt | 2 |
| 1117931-00-A | 2rd row seat belt buckle fixing bolt | 2 |
| 1508009-00-A | High voltage control module fixing bolt | 3 |
Nuts
Nylon nuts applied to chassis and suspension systems are typically classified as consumable parts. Reuse may compromise preload force integrity.
Nuts specified for control module installations (e.g., safety control modules, car computer modules) are generally non-reusable.
| Part Number | Description | Quantity |
|---|---|---|
| 1004378-00-B | Nut that attaches the safety restraint module to vehicle | 3 |
| 1104654-00-B | Nut that attaches the high-voltage contactor to high-voltage terminal | 1 |
| 1109263-00-B | Nut that attaches the tie rod end to the knuckle | 2 |
| 1109263-00-B | Nut that attaches the front lower compliance link to the knuckle | 1 |
| 1109263-00-B | Nut that attaches the front lower lateral link to the knuckle | 1 |
| 1111145-00-A | Nut that attaches the upper control arm to the knuckle | 1 |
| 1111145-00-A | Nut that attaches the stabilizer bar to the bracket | 2 |
| 1111533-00-A | Nut that attaches the upper aft link to the left rear suspension knuckle | 1 |
| 1111541-00-A | Booster fixing nut | 4 |
| 1111542-00-A | Nut that attaches the drop link to the rear stabilizer bar and rear knuckle | 2 |
| 1111543-00-A | Nut that attaches the front stabilizer bar link to the stabilizer bar and damper | 2 |
| 1765133-00-A | Half shaft nut | 1 |
| 1523698-00-A | 12V output harness fixing nut | 1 |
| 1111541-00-A | car computer fixing nut | 6 |
Others
All label stickers are designated as single-use items; replacement is required after removal.
Rubber O-rings, due to their operation under high-temperature, high-pressure, and highly corrosive conditions, are recommended for replacement to ensure sealing integrity.
| Part Number | Description | Quantity |
|---|---|---|
| 1096344-00-D | Inspection cover sticker | 1 |
| 1467057-00-G | Ancillary bay seal installed on high voltage battery pack | 1 |
| 1106827-00-C | Seal fixing clip | 9 |