2021-05-14
Harness - Heat Pad - Seat Cushion - 2nd Row (Remove and Replace)
Correction code
17100062
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
- Disconnect the 2nd row RH heat pad electrical connector.
- Disconnect the 2nd row RH occupancy sensor electrical connector.
- Disconnect the 2nd row middle heat pad electrical connector.
- Disconnect the 2nd row middle occupancy sensor electrical connector.
- Disconnect the 2nd row LH heat pad electrical connector.
- Disconnect the 2nd row LH occupancy sensor electrical connector.
- Release the clips (x2) that attach the 2nd row seat cushion heat pad harness to the vehicle, and then release the harness from the hooks to remove it from the vehicle.
Install
- Install the 2nd row seat cushion heat pad harness into the vehicle.
- Connect the 2nd row LH occupancy sensor electrical connector.
- Connect the 2nd row LH heat pad electrical connector.
- Connect the 2nd row middle occupancy sensor electrical connector.
- Connect the 2nd row middle heat pad electrical connector.
- Connect the 2nd row RH occupancy sensor electrical connector.
- Connect the 2nd row RH heat pad electrical connector.
- Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).