19/02/2021 13:53:09

Cover - Seat Back - 3rd Row - LH (Remove and Replace)

Correction code 13090072 0.48 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

Remove the LH 3rd row seat back substrate. See Substrate - Seat Back - 3rd Row - LH (Remove and Replace).
Gently pull the trim cover away from the foam pad starting at the lower portion of the foam pad working upwards to remove it from the pad.

Note
The trim cover is held on to foam pad by Velcro.

CAUTION
Be careful not to tear Velcro can tear off foam pad.

Install

Starting at the upper portion of the foam pad and working downward, massage the Velcro from the LH 3rd row seat back cover into the foam pad.
Install the LH 3rd row seat back substrate. See Substrate - Seat Back - 3rd Row - LH (Remove and Replace).