25/05/2023 02:04:25

Wiper Blades (Remove and Replace) (Pair) (RHD)

Correction code Both: 17505002 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. On the touchscreen, touch Controls > Service > Wiper Service Mode to enable "Wiper Service Mode".
  2. Release the tab that attaches the LH wiper blade to the LH wiper arm, and then remove the LH wiper blade from the vehicle.
  3. Release the tab that attaches the RH wiper blade to the RH wiper arm, and then remove the RH wiper blade from the vehicle.

Install

  1. Install the new RH wiper blade onto the RH wiper arm until the retaining tab is visible and an audible click is heard.
  2. Install the new LH wiper blade onto the LH wiper arm until the retaining tab is visible and an audible click is heard.
  3. On the touchscreen, touch Controls > Service > Wiper Service Mode to disable "Wiper Service Mode".
  4. Verify operation of windshield washers and wipers.