Cover - Footwell - Passenger (RHD) (Remove and Replace)
Correction code 14055412 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Release the push clips (x3) that attach the passenger footwell cover to the IP carrier.
- Release the clips (x10) that attach the passenger footwell cover to the IP carrier.
-
Disconnect the electrical
harness from the puddle light connector and emergency speaker
connector.
- Remove the footwell cover from the vehicle.
Install
Installation procedure is the reverse of removal.