2022-03-02

Tub - Rear Trunk (Remove and Replace)

Correction code 15245402 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Remove

  1. Remove the LH and RH load floor brackets. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  2. Remove the clips (x6) that attach the trunk tub to the vehicle, and then remove the tub from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    7-seater carpet is attached by 4 clips.
    Figure 1. 5-seater
    Figure 2. 7-seater
    Figure 3. 5-seater
    Figure 4. 7-seater

Install

Installation procedure is the reverse of removal.