Bezel - Seatbelt - C-Pillar - LH (Remove and Replace)
Correction code
15180032
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Open the LH rear door.
- Fold the LH 2nd row seat back to the down position.
-
Release the clips (x2) that attach the LH 2nd row seatbelt bezel to the
upper C-pillar trim, and then remove the bezel from the seatbelt and
trim.
Install
Installation procedure is the reverse of removal.