04/05/2020 14:52:24

USB Cable - Center Console (Remove and Replace)

Correction code 21261002 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the center console. See Center Console (Remove and Install).
  2. Disconnect the electrical wiring harness connector from the USB hub.
  3. Release the clips that attach the electrical harness to the USB hub.

Install

Installation procedure is the reverse of removal.