31/08/2021 02:58:08

Bracket - License Plate - Rear (Retrofit)

Correction code 12072306 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Install

  1. Position the rear license plate bracket onto the vehicle, and then install the screws (x2) that attach the licens plate bracket to the vehicle.
    1.2 Nm (.9 lbs-ft)
    Tip: Use of the following tools is recommended:
    • T20 socket
    • 2 in extension