15/03/2023 05:04:30

Seal - Body - Side - Front - Primary - LH (Remove and Replace)

Correction code 11700302 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the LH rear door.
  2. Pull on the LH primary front side body seal to release it from the body.
    Informational PurposesAn informational icon, calling your attention
    Note
    Start in the corner closest to the B-pillar applique and pull straight down to release the upper portion of the trim first.

Install

  1. Position the LH primary front body seal to the mid A-pillar trim, and then press the seal into position working along the upper bright trim molding.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the seam on the seal is even with the bottom of the LH lower B-Pillar.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the wider side of the seal is seated towards the interior of the vehicle.
  2. Tuck the seal into the bright trim molding.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure that the trim is fitted properly into the trim panels and the headliner
  3. Press the LH primary front body seal into the B-pillar, and work downwards toward the bottom of the A-pillar.
    Informational PurposesAn informational icon, calling your attention
    Note
    If excess material forms along the seal, release the seal and disperse in opposite directions.
  4. Calibrate the windows. See .
  5. Confirm that the window operates correctly and without any abnormal noise.