2021-02-26
Headrest Closeout - 3rd Row Seat - LH (Remove and Replace)
Correction code
13093102
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Open the liftgate.
-
Remove the 3rd row LH
headrest.
NoteSimultaneously depress the guide button and insert a 90 degree pick into the guide openeing, and then lift up on the headrest to remove it.
- Use a pry tool to pry the 3rd row LH headrest guide lock from the seat assembly, and then remove it from the assembly.
- Use a pry tool to pry the 3rd row RH headrest guide lock from the seat assembly, and then remove it from the assembly.
- Lift the 3rd row LH headrest closeout panel upward to release the tabs (x2) that attach it to the 3rd row LH backrest, and then remove it from the vehicle.
Install
- Install the 3rd row LH closeout panel onto the 3rd LH backrest.
- Install the 3rd row RH headrest guide lock into the seat assembly.
- Install the 3rd row LH headrest guide lock into the seat assembly.
-
Insatll the 3rd row LH headrest.
NoteSimultaneously depress the adjustment guides during isntallation.
- Close the liftgate.