Table 1. Torque Specifications: Cover - Rear Suspension - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the rear suspension cover to the lower rear control arm assembly	6 Nm (4.4 lbs-ft)	10 mm socket 2 in extension	Replace	Replace with new patched bolt (PN - 1484170-00-A)

Table 2. Torque Specifications: Damper Assembly - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the front upper control arm mount to the front spring and damper	23 Nm (17.0 lbs-ft)	13 mm deep socket 3 in extension	Reuse
Bolt that attaches the front wheel speed sensor to the knuckle	5 Nm (3.7 lbs-ft)	10 mm deep socket 4 in extension	Reuse
Nut that attaches the front jounce bracket to the stud on the body	6 Nm (4.4 lbs-ft)	10 mm deep socket 4 in extension	Reuse
Bolt and nyloc nut that attach the front upper control arm to the knuckle	56 Nm (41.3 lbs-ft)	T47 socket 15 mm wrench	Replace nut (1111145-00-A), reuse bolt
Nyloc nut that attaches the front stabar link to the front strut	98 Nm (72.3 lbs-ft)	18 mm wrench 18 mm socket (torque) T40 socket 6 in extension	Replace (1111543-00-A or later)	Hold the joint in place with the T40
Bolt and nut that attach the strut to the lower control arm	106 Nm (78.2 lbs-ft)	21 mm socket 21 mm wrench	Reuse

Table 3. Torque Specifications: Damper - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the rear damper to the body at the top mount	41 Nm (30.2 lbs-ft)	15 mm socket 3 in extension	Reuse
Nut and bolt securing rear damper to rear lower aft link	115 Nm (84.8 lbs-ft)	21 mm wrench 21 mm socket	Reuse	Mark with paint pen

Table 4. Torque Specifications: Drop Link - Stabilizer Bar - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the LH drop link to the rear stabilizer bar and rear LH knuckle	55 Nm (40.6 lbs-ft)	5 mm hex socket 15 mm combination flex head wrench 15 mm socket flex head ratchet	Replace

Table 5. Torque Specifications: Four Wheel Alignment Check and Adjust

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Lower Aft Link to Knuckle Bolt	115 Nm (84.8 lbs-ft)		Reuse
Lower Aft Link to Subframe Bolt	115 Nm (84.8 lbs-ft)		Reuse
Upper Aft Link to Subframe Bolt	134 Nm (98.8 lbs-ft)		Reuse
Nut on the rear LH toe link to subframe bolt	85 Nm (62.7 lbs-ft)		Reuse
LH FUCA mount bolts	62 Nm (45.7 lbs-ft)		Reuse
Smaller LH FUCA mount bolts	35 Nm (25.8 lbs-ft)		Reuse
Jam nut on the LH inner tie rod	80 Nm (59.0 lbs-ft)		Reuse

Table 6. Torque Specifications: Front Upper Control Arm (FUCA) Mount - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the LH front upper control arm to the damper assembly	23 Nm (17.0 lbs-ft)	13 mm socket 3 in extension	Reuse
Bolts that attach the LH front upper control arm to the front upper control arm mount	50 Nm (36.9 lbs-ft)	13 mm socket	Reuse
Nyloc nut that attaches the front stabar link to the front strut	98 Nm (72.3 lbs-ft)	18 mm wrench 18 mm socket (torque) T40 socket 6 in extension	Replace (1111543-00-A-)
Bolt and nut that attach the strut to the lower control arm	106 Nm (78.2 lbs-ft)	21 mm socket 21 mm wrench	Reuse
Bolt and nyloc nut that attach the front upper control arm to the knuckle	56 Nm (41.3 lbs-ft)	T47 socket 15 mm wrench	Replace nut (1111145-00-A-), reuse bolt
Bolt that attaches the LH front brake caliper hose to the knuckle	5 Nm (3.7 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench 4 in extension	Reuse
Smaller bolts that attach the LH front upper control arm mount to the body	35 Nm (25.8 lbs-ft)	13 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse
Larger bolts that attach the LH front upper control arm mount to the body	62 Nm (45.7 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse

Table 7. Torque Specifications: Hub - Front - LH (Dual Motor) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
LH front drive unit halfshaft nut	300 Nm (221.2 lbs-ft)	32 mm deep impact socket	Replace
Bolt that attaches the LH front rotor to the LH front hub	5 Nm (3.7 lbs-ft)	10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolt that attaches the front brake hose bracket to the LH front knuckle	5 Nm (3.7 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench 4 in extension	Reuse
Bolts that attach the LH front caliper to the LH front knuckle	94 Nm (69.3 lbs-ft)	External Torx E18	Replace
Bolts that attach the LH front hub and bearing to the LH front knuckle	85 Nm (62.7 lbs-ft)	18 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse

Table 8. Torque Specifications: Hub - Front - LH (RWD) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH front hub to the knuckle	85 Nm (62.7 lbs-ft)	18 mm socket 3 in extension	Reuse

Table 9. Torque Specifications: Hub - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH rear hub and bearing to the LH rear knuckle	85 Nm (62.7 lbs-ft)	18 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse
Bolt that attaches the LH rear rotor to the LH rear hub	5 Nm (3.7 lbs-ft)	10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolts that attach the LH rear caliper to the LH rear knuckle	83 Nm (61.2 lbs-ft)	External Torx E18	Replace
Nut that attaches the LH rear halfshaft to the LH rear hub assembly	300 Nm (221.2 lbs-ft)	32 mm deep impact socket 6 in extension	Replace

Table 10. Torque Specifications: Isolator - Front Upper Control Arm (FUCA) Mount - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Smaller bolts that attach the LH front upper control arm mount to the body	35 Nm (25.8 lbs-ft)	13 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse
Larger bolts that attach the LH front upper control arm mount to the body	62 Nm (45.7 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse

Table 11. Torque Specifications: Knuckle - Suspension - Front - LH (Dual Motor) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH front brake dust shield to the knuckle	8 Nm (5.9 lbs-ft)	Torx T30 socket Flex head ratchet/flex head torque wrench 4 in extension	Reuse
Bolt that attaches the LH front ABS wheel speed sensor to the LH front suspension knuckle	5 Nm (3.7 lbs-ft)	10 mm deep socket Flex head ratchet/flex head torque wrench 4 in extension	Replace
Nut that attaches the LH tie rod end to the LH front suspension knuckle	180 Nm (132.7 lbs-ft)	22 mm socket 12 pt 10mm combination wrench 12 pt 22 mm combination wrench	Replace
Nut that attach the LH upper control arm to the LH front suspension knuckle	56 Nm (41.3 lbs-ft)	Torx T47 socket 12 pt 15 mm combination wrench	Replace
Nut that attaches the LH front lower compliance link to the front suspension knuckle	180 Nm (132.7 lbs-ft)	22 mm socket 22 mm ratcheting combination wrench Torx T45 socket	Replace
Nut that attaches the LH front lower lateral link to the LH front suspension knuckle	180 Nm (132.7 lbs-ft)	22 mm socket 22 mm ratcheting combination wrench Torx T45 socket	Replace

Table 12. Torque Specifications: Knuckle - Suspension - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH rear hub and bearing to the LH rear knuckle	85 Nm (62.7 lbs-ft)	18 mm socket Flex head ratchet/flex head torque wrench 3 in extension	Reuse
Bolts that attach the LH rear brake dust shield to the knuckle	8 Nm (5.9 lbs-ft)	Torx T30 socket 4 in extension	Reuse
Bolt that attaches the rear LH ABS wheel speed sensor to the knuckle	5 Nm (3.7 lbs-ft)	10 mm socket 4 in extension	Replace
Nut that attaches the LH stabilizer bar link to the LH rear suspension knuckle	55 Nm (40.6 lbs-ft)	5 mm hex 15 mm ratcheting combination flex head wrench	Replace
Bolt and nut that attach the LH rear upper aft link to the LH rear suspension knuckle	134 Nm (98.8 lbs-ft)	21 mm socket 21 mm ratcheting combination flex head wrench 6 in extension	Reuse
Bolt and nut that attach the LH rear upper fore link to the LH rear suspension knuckle	84 Nm (61.9 lbs-ft)	18 mm socket 18 mm ratcheting combination wrench 3 in extension	Reuse
Bolt and nut that attach the LH rear toe link to the LH rear suspension knuckle	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm ratcheting combination wrench	Reuse
Bolt and nut that attach the LH rear lower fore link to the LH rear suspension knuckle	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm ratcheting combination wrench Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear damper to the LH lower aft link	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm combination wrench Flex head ratchet/flex head torque wrench	Reuse
Bolt and nut that attach the LH rear aft lower link to the LH rear suspension knuckle	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm ratcheting combination wrench Flex head ratchet/flex head torque wrench	Reuse
Nut that attaches the LH rear halfshaft to the LH rear hub assembly	300 Nm (221.2 lbs-ft)	32 mm deep impact socket 6 in extension	Replace

Table 13. Torque Specifications: Link - Compliance - Lower - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt and nut that attach the LH front lower compliance link to the front subframe	115 Nm (84.8 lbs-ft)	21 mm socket	Reuse
Nut that attaches the LH front lower compliance link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm socket Torx T45 socket	Replace	1109263-00-B or newer

Table 14. Torque Specifications: Link - Lateral - Lower - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the LH front lower lateral link to the subframe	135 Nm (99.6 lbs-ft)	21 mm socket 6 in extension	Replace	1109912-00-B or newer
Bolt and nut that attach the LH strut to the LH front lower lateral link	106 Nm (78.2 lbs-ft) 106 Nm (78.2 lbs-ft)	21 mm socket	Reuse
Nut to attach the LH front lower lateral link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm socket	Replace	1109263-00-B or newer

Table 15. Torque Specifications: Links - Lateral - Lower - Front - Pair (Remove & Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH front lower lateral link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm socket Torx T45 socket 22 mm combination wrench Flex head ratchet/flex head torque wrench	Replace
Bolts (x2) that attach the LH front lower lateral link to the subframe	135 Nm (99.6 lbs-ft)	21 mm socket 6 in extension Cordless Ratchet/Impact Driver Ratchet/torque wrench	Replace	Install only bolt PN 1109912-00-B (China 1109912-99-B) or newer, which has patch material on the bolt threads.
Bolt and nut that attach the LH strut to the LH front lower lateral link	106 Nm (78.2 lbs-ft)	21 mm socket 21mm 12pt combination wrench Cordless Ratchet/Impact Driver	Reuse
Bolt that attaches the LH front brake rotor to the knuckle	5 Nm (3.7 lbs-ft)	10 mm socket 2 in extension Flex head ratchet/flex head torque wrench	Reuse

Table 16. Torque Specifications: Stabilizer Bar - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the front stabilizer bar to the LH and RH front stabilizer bar links	98 Nm (72.3 lbs-ft)	Torx T40 bit 18 mm combination wrench	Replace	1111543-00-A
Nuts that attach the front stabilizer bar to the front subframe	35 Nm (25.8 lbs-ft)	15 mm deep socket 3 in extension	Replace	1111145-00-A

Table 17. Torque Specifications: Stabilizer Bar - Rear (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts that attach the stabilizer bar to the end links	55 Nm (40.6 lbs-ft)	15 mm socket 5 mm hex	Replace
Bolts that attach the rear stabilizer bar to the rear subframe	30 Nm (22.1 lbs-ft)	11 mm socket 6 in extension	Replace

Table 18. Torque Specifications: Suspension - Rear (Check Torque)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH and RH rear suspension covers to the vehicle	6 Nm (4.4 lbs-ft)	10 mm socket 2 in extension
Bolts (x3) that attach the LH and RH shear plates to the HV battery	35 Nm (25.8 lbs-ft) 130 Nm (95.9 lbs-ft)	13 mm socket 21 mm socket 3 in extension 6 in extension
Nut that attaches the LH rear lower fore link to the rear subframe	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH rear lower fore link to the knuckle	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm ratcheting combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the rear stabilizer bar to the LH stabilizer bar link	55 Nm (40.6 lbs-ft)	15 mm socket 5 mm hex socket 15 mm flex head combination ratcheting wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH stabilizer bar link to the knuckle	55 Nm (40.6 lbs-ft)	15 mm socket 5 mm hex socket 15 mm flex head combination ratcheting wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH toe link to the rear subframe	85 Nm (62.7 lbs-ft)	18 mm deep socket 18 mm combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH toe link to the knuckle	76 Nm (56.0 lbs-ft)	18 mm socket 18 mm ratcheting combination wrench
Nut that attaches the LH rear lower aft link to the rear subframe	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm combination wrench
Nut that attaches the LH rear lower aft link to the knuckle	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm ratcheting combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH rear damper assembly to the LH lower aft link	115 Nm (84.8 lbs-ft)	21 mm socket 21 mm combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH rear upper fore link to the rear subframe	84 Nm (61.9 lbs-ft)	18 mm socket 18 mm combination wrench Flex head ratchet/flex head torque wrench
Nut that attaches the LH rear upper fore link to the knuckle	84 Nm (61.9 lbs-ft)	18 mm socket 18 mm ratcheting combination wrench 3 in extension
Nut that attaches the LH rear upper aft link to the rear subframe	134 Nm (98.8 lbs-ft)	21 mm socket 21 mm combination wrench
Nut that attaches the LH rear upper aft link to the knuckle	134 Nm (98.8 lbs-ft)	21 mm socket 21 mm ratcheting combination flex head wrench 6 in extension
Bolts that attach the rear diffuser to the body	4 Nm (2.9 lbs-ft)	10 mm socket 2 in extension

Table 19. Torque Specifications: GUID-05555794-C8F7-4CC0-8204-3B8434575338.html

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH rear ride height sensor to the LH rear upper aft link	10 Nm (7.4 lbs-ft)	10 mm deep socket Flex head ratchet/flex head torque wrench Ratchet/torque wrench	Reuse
Nut that attaches the LH rear ride height sensor to the rear subframe	10 Nm (7.4 lbs-ft)	10 mm deep socket Flex head ratchet/flex head torque wrench Ratchet/torque wrench	Reuse

Table 20. Torque Specifications:

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes