Cover - Latch - Liftgate (Remove and Replace)
Correction code
15110102
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace).
-
Insert a small flat head screwdriver between the latch and latch cover, as
illustrated, and then gently pry the latch cover away from the latch.
Install
Installation procedure is the reverse of removal.