Cover - Applique - B-Pillar - LH (Remove and Replace)
Correction code
12200112
NOTE:
Unless otherwise explicitly stated in the procedure, the above
correction code and FRT reflect all of the work required to perform
this procedure, including the linked procedures. Do not stack
correction codes unless explicitly told to do so.NOTE: See
Flat Rate
Times to learn more about FRTs and how they are created.
To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See
Personal Protection to make sure
wearing proper PPE when performing the below
procedure.
Remove
- Open the LH front and rear doors.
-
Release the clips that
attach the B-pillar applique fastener cover to the vehicle, and then remove
the cover.
Install
-
Position the B-pillar
applique fastener cover onto the vehicle, and then engage the clips that
attach the B-pillar applique fastener cover to the vehicle.
- Close the LH front and rear door.