30/08/2022 09:37:49

Harness - Seat Cushion - 3rd Row (Remove and Replace)

Correction code 17100042 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all the doors and fully lower all the windows.
  2. Move the front seats fully forward.
  3. Remove the 3rd seat cushion. See Cushion - Seat - 3rd Row (Remove and Replace).
  4. Remove the 3rd row seat cup holder closeout. See Closeout - Cup Holder - Seat - 3rd Row (Remove and Replace).
  5. Remove the 3rd row seat cup holder liner. See Liner - Cup Holder - Seat - 3rd Row (Remove and Replace).
  6. Disconnect the 3rd row USB hub connector.
  7. Disconnect the 3rd row RH occupancy switch.
  8. Disconnect the 3rd row LH occupancy switch.
  9. Release the clip that attaches the 3rd row seat cushion harness to the seat cushion assembly.
  10. Release the 3rd row seat cushion harness from the hold tabs, and then remove the harness from the vehicle.

Install

  1. Position the 3rd row seat cushion harness into the seat cushion assembly.
  2. Install the clip that attaches the 3rd row seat cushion harness to the seat cushion assembly.
  3. Connect the 3rd row USB hub connector.
  4. Connect the 3rd row RH occupancy switch.
  5. Connect the 3rd row LH occupancy switch.
  6. Install the 3rd row seat cushion harness into the hold tabs.
  7. Install the 3rd row seat cup holder liner. See Liner - Cup Holder - Seat - 3rd Row (Remove and Replace).
  8. Install the 3rd row seat cup holder closeout. See Closeout - Cup Holder - Seat - 3rd Row (Remove and Replace).
  9. Install the 3rd seat cushion. See Cushion - Seat - 3rd Row (Remove and Replace).
  10. Move the front seats to the original position.
  11. Raise all the windows and close all the doors.