Panel - Cowl Screen (Remove and Replace)
Correction code
12250902
0.24
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
Remove
- Open the driver's door and fully lower the window.
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
- Remove the LH and RH wiper arms. See Wiper Arms (Remove and Replace).
-
Release the washer pump hose
from the Y-tube, and then release the clip that attaches the tube to the
cowl screen.
-
Release the clips that attach the cowl screen panel to the vehicle, and then remove the cowl screen panel from the vehicle.
Install
Installation procedure is the reverse of removal.