2021-04-29

B-Cover - Outer - 2nd Row - RH (7-Seat) (Remove and Replace)

Correction code 13084312 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all doors and fully lower all windows.
  2. Move the driver seat fully forward.
  3. Position the LH 2nd row seat into easy entry mode.
  4. Fold the RH 2nd row seat to the down position.
  5. Move the RH 2nd row seat fully forward.
  6. Remove the RH 2nd row seat toe kick cover. See Cover - Toe Kick - 2nd Row Seat - RH (7-Seat) (Remove and Replace).
  7. Release the clips (x4) that attach the RH 2nd row seat outer B-cover from the inner B-cover, and slide the cover towards the rear of the seat to remove it from the assembly.

Install

Install procedure is the reverse of removal.