2021-05-21
NVH Pad - Instrument Panel - Upper (Remove and Replace)
Correction code
14050092
1.98
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the instrument panel carrier from the cross car beam. See IP Carrier (Remove and Install).
-
Peel the instrument panel NVH pad from the instrument panel carrier.
- Use IPA wipes to remove any remaining adhesive from the instrument panel carrier.
Install
-
Install a new NVH pad onto the instrument panel carrier.
- Install the instrument panel carrier. See IP Carrier (Remove and Install).