Cover - Toe Kick - 2nd Row Seat - LH (7-Seat) (Remove and Replace)
Correction code
13080012
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Open the LH front door and fully lower the LH windows.
- Move the driver seat fully forward.
- Open the LH rear door.
- Move the LH 2nd row seat to easy entry mode.
-
Release the clips (x7) that
attach the LH 2nd row seat toe kick cover to the seat assembly, and then
remove the cover from the vehicle.
Tip: Pry up on the LH side of the cover to release the clips, and then pry up on the RH side to fully remove it.
Install
Installation procedure is the reverse of removal.