2021-02-26

Back Panel - 3rd Row Seat - LH (Remove and Replace)

Correction code 13064002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  2. Use a trim tool to release the clips (x10) that attach the LH 3rd row seat back panel to the seatback assembly, working from the top of the seat toward the bottom.
  3. Maneuver the back panel upward to release the guiding tabs from the seat.
  4. Remove the back panel from the vehicle.

Install

  1. Insert the guiding tabs on the back panel into the slots on the seatback assembly.
  2. Starting from the bottom and working upward, install the back panel by pressing on the back panel to engage all clips into the seatback assembly.
  3. Install the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).