17/10/2022 09:55:35

Rail - Lower - Center Console - LH (Structural Pack) (Remove and Replace)

Correction code 15198102 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the center console from the vehicle. See Center Console (2.0) (Structural Pack) (Remove and Install).
  2. Remove and discard the bolts (x2) that attach the LH center console lower rail to the vehicle, slide the rail forward to release it from the center console riser assembly, and then remove the rail from the vehicle.
    4.5 Nm (3.3 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 10 mm socket

Install

  1. Position the LH center console lower rail into the vehicle, slide the rail rearward to secure it onto the center console riser assembly, and then install new bolts (x2) that attach the rail to the vehicle.
    4.5 Nm (3.3 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 10 mm socket
  2. Install the center console. See Center Console (2.0) (Structural Pack) (Remove and Install).