Radiator (Remove and Replace)
Correction code 18301002 1.38 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the active grille shutter. See Active Grille Shutter (Remove and Replace).
- Release the locking tabs that attach the radiator to the fan and shroud assembly, and then slide the radiator out of the holding mounts.
Install
Installation procedure is the reverse of removal, except for the following:
- Perform a cooling system vacuum refill. See Cooling System (Vacuum Refill).