04/09/2024 15:07:01

Seal - Glass Run - Front Door - LH (Remove and Replace)

Correction code 11701112 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2023-11-24: Updated the procedure according to the latest validation.
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

Remove

  1. Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Install).
  2. Remove the LH front door inner belt seal from the door. See Seal - Inner Belt - Front Door - LH (Remove and Replace).
  3. Remove the LH front door outer belt seal from the door. See Seal - Outer Belt - Front Door - LH (Remove and Replace).
  4. Remove the LH door mirror assembly. See Door Mirror Assembly - LH (Remove and Install).
  5. Pull upwards to remove the LH front door glass run seal from the LH front door.

Install

  1. Position the new LH front door glass run seal on the LH front door.
    Tip: If necessary, apply a small amount of P80 lubricant on the length of the seal to aid installation.
  2. Install the LH door mirror assembly. See Door Mirror Assembly - LH (Remove and Install).
  3. Remove the LH front door outer belt seal from the door. See Seal - Outer Belt - Front Door - LH (Remove and Replace).
  4. Install the LH front door inner belt seal. See Seal - Inner Belt - Front Door - LH (Remove and Replace).
  5. Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Install).