19/02/2021 13:11:14

Podium - 2nd Row Seat - RH (7-Seat) (Remove and Replace)

Correction code 13020042 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the RH 2nd row seat assembly. See Seat Assembly - 2nd Row - RH (7-Seat) (Remove and Replace).
  2. Release the clips that attach the RH 2nd row seat cushion harness to the podium.
  3. Remove the clip that attaches the RH 2nd row seat cushion pan to the seat frame.
  4. Slightly lift the RH 2nd row seat cushion pan upward, but do not fully remove the cushion at this time.
  5. Remove the bolts that attach the RH 2nd row seat podium to the seat seat tracks.
    37 Nm (27.3 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 11 mm socket
    • Flex head ratchet/flex head torque wrench
  6. With assistance, remove the RH 2nd row seat podium from the seat track.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use one hand to engage the towel bar, and then move the inner seat track rearward with the other hand until the groove on the seat podium releases from the inner seat track. Lift the podium to remove it from the seat track.

Install

  1. With assistance, install the RH 2nd row seat podium onto the seat track.
    Informational PurposesAn informational icon, calling your attention
    Note
    Install the groove on the podium onto the outer seat track, and then align the groove on the podium onto the inner seat track. Engage the towel bar with one hand, and then move the inner seat track inward until the groove on the podium engages the seat track.
  2. Install the bolts that attach the RH 2nd row seat podium to the seat seat tracks.
    37 Nm (27.3 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 11 mm socket
    • Flex head ratchet/flex head torque wrench
  3. Push downward on the RH 2nd row seat cushion to fully seat the cushion to the frame.
  4. Install the clip that attaches the RH 2nd row seat cushion pan to the seat frame.
  5. Fasten the clips that attach the RH 2nd row seat cushion harness to the podium.
  6. Install the RH 2nd row seat assembly. See Seat Assembly - 2nd Row - RH (7-Seat) (Remove and Replace).