17/11/2023 14:13:31

Firmware Update - Mobile Connector

Correction Code 50010003

Update

Informational PurposesAn informational icon, calling your attention
Note
Charge the vehicle to at least 55% before continuing with this procedure.
  1. Open the LH front door.
  2. Connect the Mobile Connector to a wall outlet.
  3. Use the button on the Mobile Connector to open the charge port door, and then connect the Mobile Connector to the vehicle.
  4. On the touchscreen charging menu, touch Set Limit, and then set the charge limit below the current charge level.
  5. The Mobile Connector firmware update will begin within 1 minute.
    Informational PurposesAn informational icon, calling your attention
    Note
    A notification will appear on the instrument panel, stating "Charge Connector Update in Progress".
  6. The Mobile Connector firmware update will finish within 3 minutes.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ignore any charging related error messages that appear on the instrument panel/touchscreen.
  7. Disconnect the Mobile Connector from the vehicle, and then close the charge port door.
  8. Disconnect the Mobile Connector from the wall outlet.
  9. Connect the Mobile Connector to the wall outlet.
  10. Use the button on the Mobile Connector to open the charge port door, and then connect the Mobile Connector to the vehicle.
  11. On the touchscreen charging menu, touch Set Limit, and then set the charge limit above the current charge level.
  12. Make sure that the vehicle begins charging.
  13. Disconnect the Mobile Connector from the vehicle, and then close the charge port door.
  14. Disconnect the Mobile Connector from the wall outlet.