Switch - Seat Fold (Remove and Replace)
Correction code 13051902 0.42 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Open all doors and fully lower all windows.
- Move the front seats to their foremost position.
- Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
- Remove the LH trunk side trim. See Trim - Side - Trunk - LH (Remove and Replace).
- Release the tabs (x5) that attach the 2nd row seat fold switch pack to the LH trunk side trim, and then remove it from the trim.
Install
Installation procedure is the reverse of removal.