14/10/2020 10:19:25

Carrier - Rocker Panel - LH (Remove and Replace)

Correction code 12202402 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Torque Specifications

Table 1. Torque Specifications: Carrier - Rocker Panel - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the LH lower rocker carrier to the body
5 Nm (3.7 lbs-ft)
  • 10 mm socket
  • 4 in extension
Reuse

Remove

  1. Remove the LH rocker panel cover. See Cover - Rocker Panel - Lower - LH (Remove and Replace).
  2. Remove the bolts that attach the LH rocker panel carrier to the body.
    5 Nm (3.7 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 10 mm socket
    • 4 in extension
  3. Release the clips that attach the LH lower rocker carrier to the body, and then remove the carrier from the body.

Install

Installation procedure is the reverse of removal.