15/05/2023 00:48:13

Body Reinforcement - Floor - 2nd Row (Remove and Replace)

Correction code 10101802 1.08 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

  • 2023-05-10: Reorganized the procedure.

Remove

  1. Remove the LH and RH front seats from the vehicle. See Seat Assembly - 1st Row - LH (Remove and Replace).
  2. Remove the center console. See Center Console (Remove and Replace).
  3. Remove the LH and RH 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  4. Remove the LH and RH lower C-pillar trim.. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  5. Remove the LH and RH lower B-pillar trims. See Trim - B-Pillar - Lower - LH (Non-Structural Pack) (Remove and Replace).
  6. Remove the 2nd row floor mat from the vehicle.
  7. Remove the clips (x3) that attach the rear carpet to the vehicle.
  8. Remove the rear carpet from the vehicle
  9. Remove the 2nd row body reinforcement from the vehicle.

Install

  1. Use IPA wipes to clean all adhesive residue and debris.
  2. Install the 2nd row body reinforcement to the vehicle.
  3. Install the clips (x3) that attach the rear carpet to the vehicle.
  4. Install the 2nd row floor mat to the vehicle.
  5. Install the LH and RH lower B-pillar trims. See Trim - B-Pillar - Lower - LH (Non-Structural Pack) (Remove and Replace).
  6. Install the LH and RH lower C-pillar trim.. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  7. Install the LH and RH 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).