Reflector - Fascia - Rear - LH (Remove and Replace)
Correction code
17403502
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. NOTE: See Ergonomic Precautions for safe and healthy working
practices.
Remove
-
Use a plastic trim tool to
release the clips (x2) that attach the LH rear fascia reflector to the rear
fascia assembly, and remove the reflector from the fascia.
NoteDiscard of the old reflector if any clips are broken.
Install
Installation procedure is the reverse of removal.