16/04/2021 09:13:32

Shroud - Upper - Steering Column (Remove and Replace)

Correction code 14053702 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the steering wheel. See Steering Wheel (Remove and Install).
  2. Pull the steering column upper shroud upward to release the clips that attach it to the steering column lower shroud.
  3. Remove the clips that attach the steering column upper gap hider to the steering column.
  4. Remove the steering column upper shroud from the instrument panel.
  5. Release the clips that attach the steering column upper gap hider to the steering column shroud.

Install

  1. Position the steering column upper gap hider onto the steering column shroud, and then fasten the clips.
  2. Position the steering column upper shroud onto the instrument panel.
  3. Install the clips that attach the steering column upper gap hider to the steering column.
  4. Press the steering column upper shroud downward to fasten the clips that attach it to the steering column lower shroud.
  5. Install the steering wheel. See Steering Wheel (Remove and Install).