B-Cover - Inner - 2nd Row - RH (Remove and Replace)
Correction code
13084402
0.30
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the RH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove and Replace).
- Remove the RH 2nd row seat back. See Seat Back - 2nd Row - RH (Remove and Replace).
- Fold the seatback to the upright position, and place the assembly on a safe and stable work area.
- Release the clips that attach the RH 2nd row inner B-cover to the seat, and then pull the trim forward to remove it from the seat frame.
Install
Installation procedure is the reverse of removal.