14/05/2021 09:01:44

Harness - Backrest - 2nd Row Seat - Center (Remove and Replace)

Correction code 17100092 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all the doors and fully lower all the windows.
  2. Move the front seats fully forward.
  3. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  4. Fold the center 2nd row seat down.
  5. Extend the center 2nd row seat headrest.
  6. Remove the center 2nd row seat back backrest switch. See Backrest Switch – Seat Back – 2nd Row – Center (Remove and Replace).
  7. Remove the center 2nd row back panel trim. See Back Panel – 2nd Row Seat – Center/20 (5-Seat) (Remove and Replace).
  8. Remove the center 2nd row lumbar bun. See Lumbar Bun - 2nd Row - Center/20 (Remove and Replace).
  9. Disconnect the center 2nd row seat recline electrical connector.
  10. Pull up on the center 2nd row seat NVH guard to remove it from the seat assembly.
  11. Release the clips (x2) that attach the center 2nd row seat backrest harness to the seat assembly, and then release the harness from the harness guides to remove it from the vehicle.

Install

  1. Install the center 2nd row seat backrest harness onto the seat assembly.
  2. Install the center 2nd row seat NVH guard into the seat assembly.
  3. Connect the center 2nd row seat recline electrical connector.
  4. Install the center 2nd row lumbar bun. See Lumbar Bun - 2nd Row - Center/20 (Remove and Replace).
  5. Install the center 2nd row back panel trim. See Back Panel – 2nd Row Seat – Center/20 (5-Seat) (Remove and Replace).
  6. Install the center 2nd row seat back backrest switch. See Backrest Switch – Seat Back – 2nd Row – Center (Remove and Replace).
  7. Return the center 2nd row seat headrest to its original position.
  8. Fold the center 2nd row seat up.
  9. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  10. Return the front seats to the original positions.
  11. Raise all the windows and close all the doors.