25/06/2021 08:57:59

Duct - Floor - 2nd Row - Main (Non-Structural Pack) (Remove and Replace)

Correction code 18109702 0.66 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the LH front carpet. See Carpet - Front - LH (Remove and Replace).
  2. Release the clip that attaches the main 2nd row floor duct to the vehicle.
  3. Release the main 2nd row floor duct from the HVAC assembly and RH duct, and then remove it from the vehicle.

Install

  1. Install the main 2nd row floor duct into the HVAC assembly and RH duct.
  2. Fasten the clip that attaches the main 2nd row floor duct to the vehicle.
  3. Install the LH front carpet. See Carpet - Front - LH (Remove and Replace).