Strut Assist - Liftgate (Remove and Replace)
Correction code
11334402
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
- 1080562-00-A Hood Prop
Remove
- Open the liftgate and support it with a prop.
-
Release the lower end of the
liftgate strut from the ball stud that is attached to the vehicle.
-
Release the liftgate strut
from the ball stud that is attached to the liftgate, and then remove the
strut from the vehicle.
Install
Installation procedure is the reverse of removal.