28/05/2021 09:36:36

Isolator - Upper Spring - Rear - LH (Remove and Replace)

Correction code 31030012 0.78 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the LH rear suspension spring from the vehicle. See Spring - Rear Suspension - LH (Remove and Replace).
    Informational PurposesAn informational icon, calling your attention
    Note
    It is not necessary to remove the spring compressor from the spring assembly to remove the isolator.
  2. Remove the LH rear suspension spring upper isolator from the LH rear suspension spring.