2020-05-04

Bright Strip - Center Console - LH (Remove and Replace)

Correction code 15190202 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Torque Specifications

Table 1. Torque Specifications: Bright Strip - Center Console - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws that attach the LH center console bright trim to the center console
1.6 Nm (1.2 lbs-ft)
  • Torx T20 socket
  • 4 in extension
Reuse

Remove

  1. Remove the center console décor trim. See Decor Trim - Center Console - LH (Remove and Replace).
  2. Remove the screws that attach the LH center console bright strip to the center console.
    1.6 Nm (1.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 socket
    • 4 in extension
  3. Release the 6 tabs that attach the center console bright strip to the center console, and then remove the bright strip.

Install

Installation procedure is the reverse of removal.