30/06/2020 11:10:13

B-Cover - Outer - 2nd Row - LH (Remove and Replace)

Correction code 13084102 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all doors and fully lower all windows.
  2. Move the front seats fully forward.
  3. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  4. Release the clips that attach the LH outer 2nd row B-cover to the seat, and then pull the trim forward to remove it from the seat frame.

Install

Installation procedure is the reverse of removal.