20/07/2023 02:01:35

Quad Camera Cover - Lower (Remove and Replace)

Correction code 15050902 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

    Remove

    1. Use a trim tool to remove the lower quad camera cover.
    2. Unhook the tether from the lower quad camera cover, and then remove the lower quad camera cover.

    Install

    Installation procedure is the reverse of removal.