08/11/2023 00:45:31

NVH Stuffer - Quarter Cavity - RH (Remove and Replace)

Correction code 15302212 0.46 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all the doors and lower all the windows.
  2. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  3. Remove the RH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  4. Remove the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  5. Remove the front trunk load floor. See Trunk Load Floor - Front (Remove and Replace).
  6. Remove the trunk sill trim. See Trim - Sill - Trunk (Remove and Replace).
  7. Remove the RH trunk load floor bracket. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  8. Remove the RH trunk pocket bracket. See Bracket - Trunk Pocket - LH (Remove and Replace).
  9. Remove the RH trunk side trim. See Trim - Side - Trunk - LH (Remove and Replace).
  10. Remove the RH upper C-pillar trim. See Trim - C-Pillar - Upper - LH (Remove and Replace).
  11. Remove the subwoofer. See Subwoofer (Remove and Replace).
  12. Remove the RH quarter cavity NVH stuffer.

Install

  1. Install the LH quarter cavity NVH stuffer.
  2. Install the subwoofer. See Subwoofer (Remove and Replace).
  3. Install the RH upper C-pillar trim. See Trim - C-Pillar - Upper - LH (Remove and Replace).
  4. Install the RH trunk side trim. See Trim - Side - Trunk - LH (Remove and Replace).
  5. Install the RH trunk pocket bracket. See Bracket - Trunk Pocket - LH (Remove and Replace).
  6. Install the RH trunk load floor bracket. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  7. Install the trunk sill trim. See Trim - Sill - Trunk (Remove and Replace).
  8. Install the front trunk load floor. See Trunk Load Floor - Front (Remove and Replace).
  9. Install the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  10. Install the RH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  11. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  12. Raise all the windows and close all the doors.