2024-07-23
Front Seat Covers and Pads - 1R Front Seat Back Foam LH With Ventilation (Remove and Install)
Correction code
1307060121
1307060122
FRT
0.54
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
- 2024-04-04: Cleaned up topic.
Warning
This procedure is a DRAFT.
Although it has been validated, Warnings and Cautions might be missing. Follow safety
requirements and use extreme caution when working on or near High Voltage systems and
components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
Remove
- Remove the 1st row LH seatback trim. See Front Seat Covers and Pads - Trim TRK 1R LH Front Seat Back Premium D4 (Remove and Install).
-
Lift off the 1st row LH seatback foam
from the seatback frame.
Install
-
Install the 1st row LH seatback foam
onto the seatback frame.
- Install the 1st row LH seatback trim. See Front Seat Covers and Pads - Trim TRK 1R LH Front Seat Back Premium D4 (Remove and Install).