Suspension - Front (Torque)

Note

The following table lists torque values for the front suspension. This table is to be used for reference only. Refer to the individual procedures for accessing the specific components.

Torque Specifications

Table 1. Torque Specifications: Suspension - Front (Torque)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt and nut that attach the front upper control arm to the knuckle	60 Nm (44.2 lbs-ft)	15 mm combination wrench Torx T50 socket	Reuse Replace	Reuse the bolt, replace the nut; PN - 1111145-00-A
Bolt that attaches the wheel speed sensor bracket to the front upper control arm	5 Nm (3.7 lbs-ft)	10 mm socket	Reuse
Bolt that attaches the ride height sensor to the front upper control arm	7 Nm (5.2 lbs-ft)	10 mm socket 9 mm combination wrench	Reuse
Bolts (x2) that attach the front upper control arm to the vehicle	68 Nm (50.1 lbs-ft)	15 mm socket	Reuse
Bolts (x4) that attach the front hub to the knuckle	90 Nm (66.4 lbs-ft)	18 mm deep socket	Reuse
Nut that attaches the halfshaft to the hub	245 Nm (180.7 lbs-ft)	32 mm deep impact socket	Replace	PN - 1532923-00-A / 1020296-00-B (x2)
Nut that attaches the front tie rod to the knuckle	102 Nm (75.2 lbs-ft)	21 mm socket	Replace	PN - 1004356-00-B
Nut that attaches the lower front fore link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm combination wrench Torx T45 socket	Replace	PN - 1109263-00-B
Nut that attaches the front lower aft link to the knuckle	180 Nm (132.7 lbs-ft)	22 mm socket Torx T45 socket	Replace	PN - 1109263-00-B
Nut that attaches the stabilizer bar end link to the knuckle	70 Nm (51.6 lbs-ft)	15 mm socket 5 mm hex	Replace	PN - 1111542-00-A
Bolts (x3) that attach the front brake shield to the knuckle	8 Nm (5.9 lbs-ft)	Torx T30 socket	Reuse
Bolt and nut that attach the front lower aft link to the subframe	127 Nm (93.7 lbs-ft)	21 mm socket 22 mm combination wrench	Reuse
Nut and bolt that attach the front air spring module to the front lower aft link	140 Nm (103.2 lbs-ft)	21 mm socket 21 mm combination wrench	Reuse
Bolt and nut that attach the front lower fore link to the subframe	127 Nm (93.7 lbs-ft)	21 mm ratcheting combination wrench 22 mm fixed head wrench	Reuse
Nut that attaches the stabilizer bar end link to the stabilizer bar	70 Nm (51.6 lbs-ft)	15 mm combination wrench 5 mm hex	Replace	PN - 1659754-00-A
Nuts (x4) that attach the front stabilizer bar to the front subframe assembly	50 Nm (36.9 lbs-ft)	15 mm deep socket	Replace	Access to these bolts require front subframe drop. PN - 1659754-00-A
Bolts that attach the front brake caliper to the knuckle	135 Nm (99.6 lbs-ft)	21 mm socket	Replace