17/06/2022 13:01:00

User Data (Factory Reset)

Correction code 00022008 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Procedure

Informational PurposesAn informational icon, calling your attention
Note
The service procedure below details resetting vehicle user data when the previous user's credentials are not available.
  1. Enable Service Mode. See Service Mode (Enable and Disable).
  2. Select Actions/Autodiag, and then search for "Reset".
  3. Select the "Service Factory Reset" routine, and then click Run.
  4. When the routine has finished, close the window and exit Service Mode. See Service Mode (Enable and Disable).