Headlight - LH (Remove and Replace)
Correction code 17400102 0.78 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Remove the front fascia assembly. See Fascia Assembly - Front (Remove and Install).
-
Disconnect the electrical connector
from the LH front headlight.
-
Remove the bolts (x4) that attach the
LH headlight to the vehicle.
Note4x bolts, 10mm
-
Remove the LH headlight from the
vehicle.
CAUTIONDo not damage any components during headlight removal.
Install
-
Position the LH headlight to the
vehicle.
CAUTIONDo not damage any components during installation.
-
Install the bolts (x4) that attach the
LH headlight to the vehicle.
Note4x bolts, 10mm, 5.9 Nm
-
Connect the electrical connector to
the LH headlight.
- Install the front fascia assembly. See Fascia Assembly - Front (Remove and Install).
- Perform a firmware redeployment. See Firmware Reinstall - Toolbox.
- Perform a headlight adjustment using the tool or wall method. See Headlights - Adjust - NA (Tool Method) or Headlights - Adjust - NA (Wall Method).